1- Headlight emulator: stock headlight has a built-in CAN module. Bike ECU activates
cornering lights based on bike lean to left or right. When you remove the headlight from the bike
loom the dash will show the "CAN HLU DISC" error. This emulator replicates the headlight
presence in the bike loom, “talking” with bike ECU over CAN-line. For installation, install the “A”
connector to the bike loom after the headlight removal. “B” connector is a provisional plug for
dash laptimer auto-trigger (not included), which provides live timing data to the dashboard.
If no laptimer module is installed, leave the white “B” connector unplugged. We suggest using the
PZracing AP600 GPS trigger; refer to it’s manual for installation and operation.
2- Side-stand switch bypass: it allows sidestand removal, simulating it’s safety switch
positioned in “closed” position. Fit it to the sidestand switch connector on the bike loom, it’s
positioned on the left side radiator shroud.
3- Tail light emulator: it allows LED tail light removal, as it triggers a dash error if removed
from the bike when the bike is used with a stock ECU map. “RACE” based mapping for de-kat
exhaust disables this error, so this emulator could not be used in this case. For race mapping
reflash search our “UpMap” tool.